After-sales Service: | Lifetime Warranty |
---|---|
Warranty: | 1 Years |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
2 sets of 25L 3-layer tanks and external thermal insulation to ensure operator safety.
The tank is heated by thermal oil and the temperature is adjustable.
All parts in contact with the product must be made of stainless steel 316,
For example tanks, pump swing valves and nozzles.
· Product heating of the entire filler: tank, piston, valve, nozzle and temperature are all adjustable.
Electric stirrer: adjustable speed range 10 - 200rpm; nominal torque 5kg/cm.
The filling volume is controlled by Panasonic servo motor drive.
The mold raising and lowering systems are driven and controlled by Delta or Panasonic servo motors with adjustable speed.
· Belts for transporting shell moulds.
Keep the surface flat after heating with hot air device.
· Output is 33-40 pieces/minute.
· 2 docking stations and two conveyor belts.
· Anti-freeze frost removal system with adjustable frost removal cycle time.
· The cooling temperature can be adjusted as low as -20ºC.
refrigeration system and air-cooled circulation system
.
Model No | ZH-50L-6A |
Production Type | Linear |
Output capacity/hour | 33-40 sheets/minute |
Control Type | Servo Motor |
Quantity Nozzle | 6 |
Quantity Holders | 150 |
Blood vessel volume | 25L/set*2=50L |
exhibit | Programmable Controllers |
Quantity Operator | 1 |
Strength Consumption | 10.5 kW |
strength | AC220V-50HZ |
aspect | L8610MM* W2053MM* H1900MM |
weight | 1820 kg |
Air input | 6-8 kgf |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses