After-sales Service: | Na |
---|---|
Warranty: | Na |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
Synchronous drive system with straps, replacement of any strap can be completed within 3 minutes. Easier maintenance, no impact on production.
Suitable for containers of φ30-120mm. The cutting seat does not need to be replaced and debugged, which is superior to similar products. The new reamer cuts smoothly and the shrinkage is more beautiful.
Steam shrinking furnace, safe, simple and efficient! High energy efficiency: perfect shrinkage with the least energy.
Safety design: special insulation layer design, the outside of the furnace body remains at normal temperature, without any harm to the operator. Special door clamp design, keeps the energy inside and sealed.
The first automatic label taking mechanism (optional) greatly reduces labor intensity.
The unique transmission mechanism, cutting seat and reamer design are superior to the same industry.
The servo motor is used, which has high speed and good stability.
The high-tech microcomputer control is used, with low failure rate and quick maintenance.
.
Main unit: | Speed: 100bpm Power supply: φ AC220V 50/60hz Power consumption: 3KW Dimensions: 2400(L)*9500(W)*2500(H) Gas consumption: 50kg/hr Container range: 30-85mm (diameter) Label range: 40-240mm (length) 0.035-0.082mm (thickness) |
Steam shrink oven: | Power supply: φ AC220V 50/60hz Power consumption: 0.75KW Dimensions: 2000(L)*400(W)*2100(H) Gas consumption: 35kg/hr Steam pressure: 5kg/cm² |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses