After-sales Service: | Na |
---|---|
Warranty: | Na |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
The air dryer uses air knife technology developed for the situation that water droplets on the outside of glass bottles cannot be removed and cannot be labeled. The air dryer does not require heating and has stable performance. The drying position can be adjusted up and down according to the height of the bottle. The dryer is suitable for bottles of various shapes, has no contamination caused by brushes, is simple to operate and easy to maintain. Also, it saves the cost of replacing brushes. The machine has no wearing parts, so it is an ideal drying equipment. It is suitable for medium and high speed lines
1. It is suitable for all kinds of shaped bottles and standard bottles, with stable performance, good drying effect, no dust pollution caused by brushes, simple operation, maintenance-free, low energy consumption and no wearing parts. It is the most ideal drying equipment at present
2. It enters the low temperature fan through the air filter and enters the air knife through the pipeline after air compression, forming a strong wind belt at the mouth of the air duct and using high speed to force dry the water droplets and water film on the wall of the bottle from different directions.
3. The air knife can rotate in all directions, and the drying area can be adjusted according to the need. It is simple and convenient to operate.
4. This machine adopts imported fan, with low noise and large air volume.
Machine model |
BCCG300-01 |
Capacity |
10-300 bottle/min |
Suitable bottle height |
Various special-shaped bottles and round bottles |
Suitable bottle diameter |
50~350mm |
Voltage |
3P 380/220V 50/60HZ |
Power |
3kw |
Weight |
700KG |
Overall dimensions |
L:2300mm W:900mm H:1900mm |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses