After-sales Service: | Na |
---|---|
Warranty: | Na |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
brief introduction :
This machine is suitable for 2-500g material round flat plastic bottle or glass bottle powder filling and capping. This machine adopts high-precision cam indexing mechanism, provides indexing equal-dividing plate positioning plug cap; acceleration cam drive provides capping head lifting; constant torque capping; high-precision screw metering filling; no touch screen control. Bottle filling, no inner plug, outer cover. Accurate positioning, smooth transmission, with protective cap, accurate metering. The advantages of simple operation fully meet the new national GMP requirements.
feature.
Computer control, accurate installation and easy operation.
The engine speed can be continuously variable.
Automatic quantitative control of production.
Multiple fault prompt function.
Automatic shut-off function, it can shut down automatically if there is no continuous filling.
The exterior is made of SUS304 stainless steel, which is easy to maintain.
316L stainless steel screw filling, strong corrosion resistance.
The equipment fully complies with the new GMP requirements
Applicable specifications | 2-500g |
Production capacity | 20-50 bottles/minute |
Filling accuracy | ≤±1% |
Power supply | 220V / 50Hz |
The rotation (roll) coverage rate is over | 99% |
Automatic plug-in rate | >99% |
Gas | 1.3 m3/h 0.4-0.8Mpa |
Power | 2 kW |
Machine net weight | 500 kg |
Size: | 2200*1000*1600mm |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses