After-sales Service: | Na |
---|---|
Warranty: | Na |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
Product Category: Filling MachineProduct
ShortDesc: Controlled by PLC, driven by servo motor, controlling the twin screw transmission structure, it can achieve high-precision filling. It uses independent ball screw to connect the guide column and lifting beam.
ZHBL-1916H Intelligent high viscosity filler
Applicable materials: seed coating, SC, paste-like high-viscosity materials, etc.
1. Accurate measurement: The servo control system ensures that the piston always reaches a constant position.
2. Variable speed filling: During the filling process, when the target filling volume is approaching, slow filling can be used to prevent liquid from overflowing and contaminating the bottle.
3. Easy to adjust: To change the filling specifications, you only need to change the parameters on the touch screen, and all filling changes will be in place for the first time.
Fine-tune the dose on the touch screen to make adjustments.
.
model. | ZHBL-1916H |
Maximum size of paper box | 200×80×80mm |
Minimum size of paper box | 60 × 20 × 20 mm |
Paper Carton Quality | 250-350 g/ m2 |
Motor horsepower | 1/4HP 15:1 1.5KW/H |
power supply | 220V 50/60HZ single phase |
Machine noise | ≤80dB |
Gas source | 0.5-0.8 MPa |
Compressed air consumption | 260L/min |
Machine Measurements: | Length 1100 x Width 1500 x Height 1700 mm |
Machine weight | 450Kg |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses