After-sales Service: | Lifetime Warranty |
---|---|
Warranty: | 1 Years |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
This is the latest filling machine developed by our company. The overall parameters have reached the international advanced level, and some of them have exceeded similar foreign products. It has also passed the certification of world-renowned chemical giants. This is an in-line piston filling machine for cream and liquids. It uses PLC and touch screen panel to control materials, with accurate metering, advanced structure, stable operation, low noise, large adjustment range and fast filling speed. It is also suitable for volatile, crystallized, foaming, highly corrosive liquids such as rubber and plastic, as well as high-viscosity liquids and semi-liquids. The numbers are adjusted and measured on the touch screen control panel, and the metering of each filling head can also be adjusted. The outer surface of the machine is made of high-quality stainless steel. It has a good appearance and meets GMP standards.
Overall dimensions (length x width x height) | 2000mm×1100mm×2100mm |
weight | 900 kg |
Bottle size | >=18mm |
Bottle size | Height: 50mm-350mm Diameter: 30mm-100mm (special-shaped bottles can also be used.) |
power supply | AC 220V; 50Hz |
strength | 2.5 kW |
Maximum filling volume (one time) | 500ml (1000ml can be achieved by filling twice) |
tolerance scope | <=±1.0 |
Pneumatic (Pneumatic) Source | 0.6MPa clean and stable compressed air |
Filling head | 8 heads |
Production Capacity | <4000 bottles/hour (water test) |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses