After-sales Service: | Na |
---|---|
Warranty: | Na |
Type: | Piston Filling Machine |
Automatic Grade: | Fully Automatic |
Material Type: | Paste |
Filling Valve Head: | Single-Head |
Customization: |
---|
Suppliers with verified business licenses
ZHF-006 Ultrasonic tube filling and sealing machine
ZH-006 ultrasonic sealing machine is an advanced equipment for plastic tube sealing and aluminum-plastic tube sealing. It uses the thermal shock effect generated by the ultrasonic transducer to melt the rubber tube quickly to seal the rubber tube.
No additives are required and the sealing effect will not be affected even if the surface is contaminated.
Function:
Automatic tube positioning
Automatic filling
Automatic sealing
Automatic date printing
Automatic trimming
Automatic tube output
Technical Parameters | |
Model | ZH-006 |
frequency | 20KHZ |
strength | 2000W |
power supply | AC220V single phase |
Filling range | A: 6-60ml B: 10-120ml C: 25-250ml D: 250-500ml |
Sealing diameter | 5-50mm (adjustable) |
maximum height | 0-200mm |
capacity | 20-35 tubes/minute |
northwest | 230 kg |
aspect | L1300*W900*H1550MM |
With our honesty, we promise you.
With our sincerity, we will cooperate with you.
With our sincerity, we are at your service!
1. Suitable for all kinds of plastic pipes, plastic composite pipes, aluminum-plastic composite pipes.
2. The color mark positioning selects imported photoelectric sensor and high precision stepping motor (servo motor can be selected for high standard calibration) to ensure the correct direction of the printing surface.
3. Filling nozzle goes deep into the hose, filling from bottom to top step by step, avoiding air leakage or overflow, filling accuracy up to ±1%.
4. Barrel insulation system is done by controlling the water temperature inside the laminated barrel to ensure that the material will not be damaged by overheating.
5. Swiss hot air generator can melt the end of the hose to ensure a stable heat source and facilitate subsequent sealing.
6. The annular heater heats the inner wall of the hose tail, and the external annular cooling water jacket cools the outer wall, so that the tail is heated evenly, the inner wall is tight, and the outer wall is flat and beautiful.
7. According to the shape of the tail or material and other comprehensive factors, shearing machine design for flat shear and arc shear, shear parts flat and burr-free.
8. The terminal compressed air is dried and sterilized by multi-stage filtration to ensure clean and pollution-free.
Suppliers with verified business licenses